Welded Mesh Fabric Reinforcement Grid

Application: Connecting Steel Rebars in Construction


Surface Treatment: Plain, Black Anodized,Zinc-Plated,HDG,Passivated,


Material: Steel


Generally Use: Surface Beds (Concrete Floor Slabs on Fill) and RO


Mesh Type: Wwr


Finishing Options: Epoxy Coating Galvanizing Specialty Cutting


Specification: SGS. ISO9001


HS Code: 73144100




Certification: ISO9001,SGS


Technics: Casting


Type: Fasteners


Standard: Sans 1024


Variety of Wire Sizes: W1.4 to W/D4


Trademark: Heshuo


Origin: Hebei, China



Welded Mesh Fabric Reinforcement is manufactured using cold-rolled deformed wire, electrically resistance welded at the intersections of the longitudinal and transverse wires at the required mesh spacing with minimal loss of strength and cross-sectional area.


Welded Mesh Fabric is specified and manufactured according to SANS 1024 Standard Specifications making for easy site identification, quality control and management.


Welded Mesh Fabric is generally used in surface beds (concrete floor slabs on fill) and road pavements, mesh can also be used in suspended floor slabs, concrete retaining walls, box culverts and drains, precast stadium seating, tilt-up wall panels to name a few.



Product Features



Using welded mesh drastically speeds up the construction process


Welded mesh is available in wide range of wire diameters each suited for a particular reinforcing design application


Depending on job requirements welded mesh can be designed either in flat sheets, rolls or bent to suit


The deformed wire used in the production of welded mesh improves concrete adhesion. The wire has a minimum proof stress of 485MPa and a tensile strength of 510MPa as per BS4482 Standard Specification requirements


Welded mesh can be used at higher stresses than that of high tensile rebar, resulting in an 8% overall material saving


Due to its rigid nature, concrete cover can be controlled more accurately on site


Welded mesh is manufactured in strict accordance to SANS1024 Standard Specifications as well as to international standard specifications on request


Where there is a significant amount of repetition, conventional bar reinforcement can be substituted with pre-manufactured designed mesh resulting in easier controls, speed of installation, reducing offcuts and wastage.



Welded Mesh Fabric Reinforcement Standard Fabrics - SANS 1024

	Fabric	Mesh Size Nominal Pitch of Wires		Wire Sizes		Cross Sectional Area/m Width		Nominal Mass/m2
	Ref No.	Main (mm)	Cross (mm)	Main (mm)	Cross (mm)	Main (mm)	Cross (mm)	kg	Supplied in
Square Mesh Fabric	888	200	200	12	12	566	566	8.88	Sheets only 6m x 2.4m
	746	200	200	11	11	475	475	7.46
	617	200	200	10	10	393	393	6.17
	500	200	200	9	9	318	318	5.00
	395	200	200	8	8	251	251	3.95
	311	200	200	7.1	7.1	198	198	3.11
	245	200	200	6.3	6.3	156	156	2.45
	193	200	200	5.6	5.6	123	123	1.93	Sheets or rolls
	100	200	200	4.0	4.0	63	63	1.00

Contact us if you need more details on Welded Reinforcement Grid. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Wedled Wire Mesh、Mesh Fabric Panel. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Rebar Coupler And Machine